Nor does it show Velop under Other Wi-Fi Devices. The only thing I don't understand is that the Airport Utility map shows the Internet and the TC icons (with green dots by them) but no icon for the Velop. The TC is cabled to the CORRECT Ethernet port now, it's generating its own wifi network, it shows up in the Finder sidebar under "Shared", and by clicking that I can access its files, exactly as I did when it was the internet-connected wifi server. Why could I not find that procedure in all of my online searches?!?! My Mac is on the Velop wifi network and getting online normally. Good grief, it worked! That was ridiculously simple. "Ĭan anyone tell me what I might try next? 1146 4 This process is stuck "Looking for Backup Disk." Time Machine System Settings seems to be recognizing the Time Capsule but it never gets past, "Connecting to backup disk. I switched to the network generated by the Google mesh router and manually started a Time Machine backup. The WAN port on the Time Capsule is connected to the LAN port on the Google mesh router.Īfter resetting the Time Capsule, Airport Utility prompted me through a setup process which I completed with no errors reported. The Google mesh router is creating the in-home wifi network. I'm running Ventura 13.1 on an M1 MBPro.Ĭudy LT 18 cellular modem connected via ethernet cable to the WAN port of a Google Mesh router. When I switch to my preferred wifi network, the Time Capsule isn't recognized. This almost worked but not quite.Īfter resetting the Time Capsule, the Airport Utility (latest version) set up another wifi network. I read and followed the instructions here by Bob Timmons. You may need to restart the Velop devices and restart your Mac as well.Ĭonnecting Time Capsule to Existing Network Can I connect my Time Capsule to an external router and configure the Time Capsule as an automatic, wireless backup. As long as things work OK, you probably won't care that Apple frowns upon what you are doing.Ĭheck to see if you can now access the TC using the Velop wireless. You should be able to access and back up to the TC using the Velop wireless, but Apple will not officially support this since they expect you to use the TC wireless. Later, you can go back in using AirPort Utility and turn off the WiFi signal if you wish. When you see the message of Setup Complete, click Done.įor now, my advice would be to leave the WiFi network on that the TC is producing and simply not use it. Verify.Type in the same password to confirm Password.Type in a password that will be used for both the wireless network and device name You can use the same name that you used before if you wish, or use a new device name Network Name.Type in a name for a wireless network that the TC will produceīase Station Name.Type in device name that you want to call the TC. The utility will display a screen that looks similar to the example below, except that you will see a Time Capsule instead of an AirPort Express. The setup utility assumes that you want the TC to produce a WiFi signal, but if you don't need that, or don't want to use it for guests, etc., you can turn off the WiFi on the TC later as a separate action. When you click on Time Capsule, that will start up the setup "wizard" to configure the TC. Open up AirPort Utility again, click on Other WiFi Devices, and then click on Time Capsule there. Make sure that the Ethernet cable from the Velop node connects to the WAN "O" port on the TC. The TC is showing up under Other Wireless Devices because it is in effect a new TC that has not been set up yet. It was probably not necessary to perform a factory default reset, but what is done is done, and it will not hurt to start over again.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |